Reliable hot water for every guest — at a fraction of the cost.
Hot water is one of a hotel’s largest running costs. Tempratech heat pumps cut it dramatically while keeping every tap, kitchen and pool reliably warm.
*Subject to tariff and usage.
From a boutique property to a 300-room resort, guests expect hot water instantly — at 6 a.m. peaks, in the spa, and at the pool. Tempratech designs centralized heat-pump systems that meet that demand dependably, at a running cost that protects your margins.
Four loads, one centralized system.
Guest rooms
Round the clock, and at morning peaks — sized to room count and demand.
TT-CM · 14–180 kWKitchens & F&B
Consistent hot water through service for wash-up and outlets.
to 60 °CLaundry
Including higher-temperature needs, served by the TT-HT range.
80–120 °CPool, spa & wellness
Efficient year-round heating with a titanium condenser built for pool water.
COP up to 6.9Cut one of your largest utility bills.
A heat pump moves heat rather than generating it, so it operates at 350–450% efficiency against 95% for electric heating. On Tempratech’s published comparison that is about ₹10 of hot water for every ₹44 on electric — up to 85% lower, subject to your tariff and usage.
Operating cost per 100 L of hot water*
What we'd specify for a hotel.
Commercial heat pumps
14–180 kW centralized hot water, sized to room count and demand; hot & cold where needed.
View product →Swimming pool heat pumps
Efficient year-round pool heating, 11–220 kW, COP up to 6.9.
View series →High-temperature models
For laundry and hot-process needs, to 80–120 °C.
View series →Glass-lined storage tanks
To hold hot water ready for peak demand, with electric backup.
View series →Four reasons hotel engineers specify us.
Cut one of your largest utility bills
Up to 85% versus electric heating, subject to tariff and usage.
Dependable at peak load
Keeps running even at 0 °C, with built-in voltage protection against power fluctuations.
Supports your sustainability goals
Green-building credentials for the brand, with certification to AHRI, ISO, CE, Intertek and Keymark.
Backed by service
Installation, 24×7 support and maintenance contracts — the part vendors skip.
Trusted by leading hospitality names.
Radisson, Marriott, Fairmont, Hilton, Lemon Tree and Ramada among them.
Hotel case study slot
This is where one flagship hospitality project goes — property type and size, the system installed, and the measured before/after saving. We need three things from Tempratech to fill it: the property (or an anonymised description), the model schedule, and the verified energy or cost figures. No numbers are shown until they’re confirmed.
Four questions that come up every time.
How much space does a system need?
It depends on the model schedule. Units range from 800×800×1110 mm and 140 kg on a TT-CM-14 up to 2250×2180×1150 mm and 1,300 kg on a TT-CM-180, plus storage tanks and service access. We mark the layout on your terrace or plant-room drawing at proposal stage, and units can be split across locations where space is tight.
What happens to hot water during a retrofit?
The new plant is installed and commissioned alongside the existing system, and cut over in stages at the occupancy you choose — so guest supply is not interrupted. Where the property wants it, the old system stays connected as standby. Our installation team plans the sequence with your engineering department.
Our water is hard. Will it scale up?
Storage tanks use a glass-enamel inner lining with a sacrificial anode for corrosion protection, and the range is engineered for Indian water conditions. Where hardness is high, we recommend conditioning upstream — the survey measures your water rather than assuming it.
Does performance drop in winter?
Capacity falls as ambient temperature falls, so we size on your coldest conditions rather than an annual average. Standard units keep running down to 0 °C without shutting down; for hill-station and high-altitude properties we specify the EVI cold-climate range, which operates to −30 °C.
Tell us your room count and facilities.
We’ll size a system and estimate your savings — on your own tariff, at no cost.
- Site survey before final pricing
- Specs your consultant can design around
- Installation, 24×7 support and AMC
Let's size the right system for your property.
Tell us your hot-water need and we'll recommend the right Tempratech model — free.